Scrubber FRP Manufacture
Scrubber FRP Manufacture – treatment installation in which a gas strem is brought into intensive contact with a liquid, with the aim of allowing certain gaseous components to pass from the gas to the liqud. Scrubbers can be employed as an emission-limiting technique for many gaseous emissions.
Scrubber work by spraying a wet slurry of limestone into a large chamber where the calcium in the limestone reacts with the SO2 in the flue gas. There are some variations in design of scrubbers. FOr example, some scrubbers my use other chemicals such as lime or magnesium oxide to react with the So2 in the flue gas.
Chemical scrubbers remove odour causing particels and some gases from air stream exhaust. They work by dissolving or absorbing the odour causing particels into the scrubbing media, which is traditionally a liquid. Modern chemical scrubbers can also be dry powders (dry scrubbers, venturi reactors), or slurries.
Established in 1971 as a private company, PT. Graha Fortuna Purnama has been devoted in design and manufacturer of “Fiberglass Reinforced Plastic (FRP) Products”.
Over the past years by the “Fliper Brand”, PT.GFP have been participating in many industrials with successfully, such as :
- Pulp and paper industries
- Chemicals processing plants
- Food & drink industries
- Power plants
- Cement indsutry
- Petroleum industry
- Agriculture plants and etc.
PT. GFP always cocnern to keep developing the knowledge, technologies, management and human resources to enhance the good business and customer satisfaction. Since 2002 we have been implementing of Quality Management System ISO 9001 : 2000 and had certified by SGS International Certification Body No. QID 00005 & Q 054 / ID